PCR Tubes
Med Vet International 3M Steri-Strip Skin Closure Strip, 1/4 X 4in, R1546, 6 Strips/Envelope
Skin Closure Strip Steri-Strip™ 1/4 X 4 Inch Nonwoven Material Reinforced Strip White¼ Inch by 4 Inches Provides wound support and increases the tensile strength of the wound, compared to sutures Non-invasive, sterile design helps reduce scarring and the risk of infection, compared to sutures and staples, with less tissue trauma and better cosmetic outcomes Hypoallergenic adhesive Allows early staple/suture removal – Helps patients get back to their normal routine faster Easy to apply – Fast application
Revvity Health Sciences Inc AlphaLISA SureFire Ultra Human Phospho-CDC25C (Ser216) Detection Kit, 10,000 Assay Points
AlphaLISA SureFire Ultra Human Phospho-CDC25C (Ser216) Detection Kit, 10,000 Assay Points
Bioworld PCR Dome Caps (only), 8-Strip (125 Strips), 0.2 mL, Clear, 1 PK(s)
1 pack of 125 8-strip PCR dome caps (caps only) per bag. Clear color, in 0.2ml format. Non-sterile. Rnase and DNase free.
Bellco Glass, Inc. 45mm l/p Thermowell assembly for l/p 3l vessel.Seam welded - electropolish finish316l stainless steel material ra 32 finish or betterSupply with s/cap (a523-599) & white silicone liner (a523-600)1 - Thermowell tube: 5/16"od x .242"id x 1.0" above x 8
45mm l/p Thermowell assembly for l/p 3l vessel.Seam welded - electropolish finish316l stainless steel material ra 32 finish or betterSupply with s/cap (a523-599) & white silicone liner (a523-600)1 - Thermowell tube: 5/16"od x .242"id x 1.0" above x 8
Bellco Glass, Inc. Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Port Thermowell a
Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Port Thermowell a
Bellco Glass, Inc. Thermowell Assemblies are used to hold inside one tube the RTD temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Fit through a 5/1
Thermowell Assemblies are used to hold inside one tube the RTD temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Fit through a 5/1
Bellco Glass, Inc. Stainless steal Thermowell holds liquid and RTD temperature sensor for recording internal bioreactor temperature. Signal is read by temperature controller and heating blanket temperature increases and decreases as required to maintain temperature setting.
Stainless steal Thermowell holds liquid and RTD temperature sensor for recording internal bioreactor temperature. Signal is read by temperature controller and heating blanket temperature increases and decreases as required to maintain temperature setting.
Braintree Scientific CoolCube Microtube and Microplate Cooler
CoolCube™ Microtube and Microplate Cooler is designed to store samples safely on lab bench without sample degradation due to temperature increase or fluctuation. Constructed of DuraStar (a high strength polymer) and a proprietary gel refrigerant, CoolCube maintains temperature at approximately 0C for up to four hours. Simply place the CoolCube in a freezer overnight and it's ready for use, keeping samples cool and safe at the bench, without messy ice buckets or wet tubes. One side of CoolCube can be used as a convenient PCR workstation, with wells for 10 standard 1.5/2.0ml microtubes and one 96 well PCR plate or .2ml tubes/strips. The other side can be used to hold 36 standard 1.5/2.0ml microtubes. **Sold for research purposes only and not for human use**
Sigma Aldrich Fine Chemicals Biosciences Extract-N-AmpTM Blood PCR
The Extract-N-Amp Blood PCR Kits contain all of the reagents necessary to rapidly extract host genomic DNA from whole blood and amplify targets of interest by PCR (fig. 1). This novel extraction system eliminates the need for any type of purification organic extraction centrifugation heating filtration or alcohol precipitation. The kit also includes a PCR ReadyMix(TM) specially formulated for amplification directly from the extract. This formulation uses an antibody based hot start for specific amplification.
Alkali Scientific Dome Caps for 8-PCR strip tubes, 125 x 8, 125 strips per unit
Dome Caps for 8-PCR strip tubes, 125 x 8, 125 strips per unit
Alkali Scientific ProCycle 0.2mL 8-strip PCR tub
ProCycle0 2mL 8-strip PCR tubes with separate dome caps assorted colors 125x8 1000/PK with ultrathin sidewalls and bottoms for more uniform efficient temperature transfer and separate caps This PCR reaction strip is available with either separate needle pierceable flatcaps or dome-topped caps While easily opened and closed with one hand their positive sealing will fully protect the contents from evaporation during the whole thermal cycle The cap has an integral seal preventing contamination with surface of lid While more easily handled than single tubes the strip will precisely fit standard well spacing and can also be used with 8-channel hand-held pipettors They are manufactured under the most stringent conditions to attain the highest quality standards in the industry and customers have a choice of colorless or four non-cytotoxic non-metallic colors They are packaged in tamperproof resealable bags 0 2mL strip tubes with separate flat or domed caps Ultra-thin walls Positive sea
Alkali Scientific ProCycle™ PCR Tubes, Individual 0.2m with Dome Cap (1000/Pk)
ProCycle™ PCR Tubes, Individual 0.2mL domed cap (1000/Pk), and are made of transparent, superior quality grade polypropylene for better viewing of the contents. Their ultra-thin wall design ensures rapid thermal transfer and a significant reduction in cycle and PCR reaction time. Attached hinged caps are either dome or flat-topped, and can be used with heated thermal cycler lids. The caps provide positive sealing during thermal cycling and will prevent evaporation while being easily opened and closed with one hand. The cap has an integral shield which prevents contamination with the lid surface, and has frosted writing surface for sample identification. They are packaged in tamperproof, resealable safety-lock bags. Rnase/Dnase, DNA & Pyrogen Free Polypropylene plastic High clarity Flat or domed caps Positive sealing to prevent evaporation Reduction in cycle and PCR reaction times 1000 per pack
Alkali Scientific ProCycle™ 0.5mL Thin-Walled Individual Tubes with Frosted Flat Caps, Sterile, 1000/Pk
ProCycle™ 0.5mL Thin-Walled Individual Tubes with flat caps ProCycle 0.2mL Individual PCR Tubes are designed for oil-free operation, and are made of transparent, superior quality grade polypropylene for better viewing of the contents. Their ultra-thin wall design ensures rapid thermal transfer and a significant reduction in cycle and PCR reaction time. Attached flat-topped hinged caps can be used with heated thermal cycler lids. The caps provide positive sealing during thermal cycling and will prevent evaporation while being easily opened and closed with one hand. The cap has an integral shield which prevents contamination with the lid surface, and has frosted writing surface for sample identification. They are packaged in tamperproof, resealable safety-lock bags. Rnase/Dnase, DNA & Pyrogen Free Polypropylene plastic High clarity Frosted flat cap Positive sealing to prevent evaporation Reduction in cycle and PCR reaction times 1000 per pack
Cayman Chemical LIGHCD258 EXrAClular Dom 100ug
An internal standard for the quantification of latanoprost (free acid) by GC- or LC-MS
Sigma Aldrich Fine Chemicals Biosciences GC-RICH PCR System
The GC-RICH PCR System is composed of an enzyme blend of thermostable Taq DNA Polymerase and Tgo DNA Polymerase a thermostable enzyme with a proofreading (3-5 exonuclease) activity. This polymerase mixture by itself outperforms Taq DNA Polymerase in respect to yields fidelity and specificity beside the possibility to amplify fragments up to 5 kb in length. The GC-RICH PCR Reaction buffer in combination with the separately included GC-RICH reSOLUTIONon SOLUTIONon allows to amplify difficult templates like GC-rich targets very efficiently. TA cloning is recommended. The enzyme blend produces more blunt-ended fragments than Taq DNA Polymerase. The majority of products have single A overhangs. Use 2 U for a standard 50 mul PCR.ContentsGC-RICH Enzyme Mix in storage bufferGC-RICH Reaction Buffer 5x concentrated with 7.5 mM MgCl2 and DMSOGC-RICH ReSOLUTIONon SOLUTIONon 5 MMgCl2 Stock SOLUTIONon 25 mMWater PCR Grade